|
Create perfectly sized polymer clay, metal clay and wire wrapped rings. Work your rings right on the mandrel to maintain correct size and shape. Features easy-to-read white markings, which measure rings from size 1 to 15 by quarter sizes.
|
|
|
Used for shaping, sizing and straightening rings. Also for gauging and holding rings while setting stones. Made of hardened tool steel. Mandrels are engraved with ring sizes from 1 to 15, graduated in 1/2 sizes.
|
|
|
Black plastic ring mandrel with white size markings. Sizes rings to size 15. Also used to form wire wrapped rings.
|
|
|
Jumbo Ring Mandrel
Heavy duty, 2.45 lbs. ring mandrel. Marked with U.S. standard sizes 16 - 24. Graduated in 1/4" sizes. Use with rings and small bracelets.
|
$21
See 2 Stores
See All Stores
|
|
Approximately 11 1/2'' overall. Grooved stick with marks 1 - 13
|
|
|
Bezel Mandrels Primarily used to form bezels, these mandrels are also used to shape decorative ornaments, make chain links etc. Made of hardened and tampered steel, approximately 11 long, mandrel portion is 8 (except round 8 length), with 1/2 to 1/8 taper. Made in the USA.
|
|
|
Plastic Ring Mandrel
Grooved mandrel is used with stone set rings to prevent the bottom of the stone from touching the mandrel
|
$4
See 2 Stores
See All Stores
|
|
This three piece set includes a thick vulcanized firm rubber base which absorbs shock (and sound), plus two blocks designed to perfectly nest in the rubber base. Both blocks measure about 3" in diameter, and nearly 1" thick. The stainless steel block is ideal for flattening wire, and other wire working techniques. The nylon block is ideal for work with coated wires - pair it with the nylon hammer to work harden components without scratching the finish.
|
|
|
This is a new graduated ring mandrel. Has sizes 1 to 15 in 1/4 size increments. Calibrated for accuracy. Precision ground to 0.0015". It measures approximately 12 1/2" (31.7 cm) long.
|
|
|
Steel Ring Mandrel - Ungrooved
|
$14
See 2 Stores
See All Stores
|
|
This ring mandrel, wit its stand, enables the user to create rings. Using the mandrel on the stand keeps the work secure, allowing you to use both hands to create.
|
|
|
Metal Ring Mandrel with Markings
Ring Mandrel with etched 1-15 Markings. This item is sold per each.
|
$7
See 4 Stores
See All Stores
|
|
American-made mandrels of case-hardened steel are finely polished. Two styles to fit various requirements of shaping, measuring, and enlarging rings. Sizes 1 to 16
|
|
|
Jump Ring Mandrel Set-16 piece
Set of 16 jump ring making mandrels. These metal mandrels are 5" long. Each mandrel is drilled with a hole for inserting wire. Mandrel sizes are 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 7.0, 8.0, 9.0, 10.0, 11.0 & 12.0mm.
|
$17
See 5 Stores
See All Stores
|
|
Jump Ring Mandrels - Set of 2. Small and large stainless steel with non-slip PVC handle. Each offers five different diameters. Small: 1.5, 2.5, 3.5, 4.5 and 5mm. Large 6, 7, 8, 9 and 10mm. Nicely rounded and extremely smooth so wire will not be scratched.
|
|
|
The graduated ring mandrel is used for shaping, straightening and enlarging rings. It can also be used to hold rings while setting stones. Overall length 12 1/2". Graduated sizes 1 to 15. Made of hardened tool steel.
|
|
|
This American-made mandrel of case-hardened steel is finely polished to meet various needs for shaping, measuring and enlarging rings. Great for hardening wire rings using a mallet or hammer. Round shape with half-sizes 1 to 16. 13-1/2" in length.
|
|
|
MD201, Steel Ring Mandrel, Grooved, by PEPE. Preferred by ShopNBC. These mandrels are made of hardened and polished tool steel. They have a long smooth taper to provider adequate work space and good balance. The handles are knurled for a better grip. Grooved models are designed to clear stone settings. Graduated in quarter sizes. 13 1/2" long. sizes 1 to 15. For non grooved, see stock # MD201. $26.25.
|
|
|
Expands to securely hold rings from the inside so you can work on the outside. Gain improved access for working on many different ring styles by holding from the inside. This increases your efficiency, especially when stone setting!
|
|
|
These units are stepped or tapered, allowing the formation of a ring in the correct size as its being created. The mandrel can be rotated or removed from its stand and held by hand.
|
|
|
Holds the inside ring during drilling or polishing or other work. The stick is 6" long.
|
|
|
|
|
|
Used for shaping, sizing and straightening rings. Also for gauging and holding rings while setting stones. Made of hardened tool steel. Mandrels are engraved with ring sizes from 1 to 15, graduated in 1/2 sizes. Also comes with a groove down the mandrel for help with setting stones.
|
|
|
&a mp;amp;amp;lt;b&am p;amp;amp;amp;amp;amp;amp;gt;& amp;amp;amp;amp;amp;amp;amp;am p;amp;amp;lt;font& amp;amp;amp;amp;amp;amp;amp;gt ;& amp;amp;amp;lt;font&am p;amp;amp;amp;amp;amp;amp;amp; gt;&am p;amp;amp;amp;lt;font& amp;amp;amp;amp;amp;amp;amp;am p;gt;& amp;amp;amp;amp;lt;a&a mp;amp;amp;amp;amp;amp;amp;amp ;gt;Shopping Cart Contents&a mp...
|
|
|
This lightweight mandrel, made of plastic, measures sizes 1 through 15 in half-size measurements. Economical, yet provides accurate measurement of rings for sizing.
|
|
(US)
